Guihe diesel fuel storage tank unloading shut off overfill valve with ATGs for gas station equipment
Product Introduction
Fuel level monitoring system consists of:
1. SYW-A Magnetostrictive Probe
Installed in the tank, used for measuring fuel level and temperaturer.
2. TCM-1 Touch Console
Used for display tank information, set alarm point, send conmmands to external devices.
3. Valve Controller
Connect with shut-off valve and TCM-1 Console.
4. Shut-off Valve
Installed on the inlet port of the tank, Automatic closed to stop loading immediately once received demands from Controller.
overfill prevention valves for tank System components
Consist of pneumatic butterfly valves, electric butterfly valve, control box, liquid level meter, sound and light alarm, and related accessories
overfill prevention valves for tank function
With liquid level after the chain, when the liquid level reaches 90%, the early warning, sound and light alarm; When liquid level reaches 95%, the valve closed
overfill prevention valves for tank System features
** Suitable for construction and reforming gas station, simple construction, short time limit, tank cover, safe hidden trouble
** Electric butterfly valve one-to-one installed on the oil discharge flange, to avoid discharge fault oil unloading
** Electric butterfly valve small size, light weight, there is a manual device, without adding manual valves and piping, more economical cost of renovation
** Electric butterfly valve with no alarm state, in a normally open state, tank car unloading when the operation is convenient
Magnetostrictive Liquid Level Meter
| Product Name | Description |
| Magnetostrictive Probe (SYW-A) | Measure product level, water level and temperature. Each tank need one unit. Probe Length:600~4000mm. Accuracy:±0.3mm |
| Touch Control Console (TCM-1) | Monitor up to 2 tanks; Each gas station need one unit. Display product level, water level, temperature, volume, ullage. |
Package
